Lonseal’s recommended adhesive for vehicle installation on horizontal surfaces such as floor.
We have a blog post on how to install Lonseal flooring with the 650 epoxy adhesive that also mentions some easier-to-use alternatives.
- Lonseal 650 Epoxy Adhesive is formulated for high performance installation of Lonseal flooring on horizontal surfaces such as floors
- Wet set adhesive
- Lonseal recommends – Half-gallon: for 85-110 square feet coverage, 1 Gallon: for 170-225 square feet coverage.
- Open Time (the time between the two-part epoxy being mixed until placing the flooring material into the adhesive) is up to 15 minutes
- Working Time (the time for the adhesive to accept the flooring material after being applied to the substrate) is up to 15 minutes
Important: this product should not be exposed to freezing temperatures or it can be damaged. Please keep this in mind when ordering to colder climates!
Note: This adhesive must be applied by a trowel with 1/16″ x 1/32″ x 1/32″ U-Notches. Trowel sizes is listed by width/depth/space. All information provided above will vary depending on the job site conditions, including temperature, humidity, substrate porosity, and applicator.
Technical Data Sheet (PDF)
Safety Data Sheet (PDF)
